Skip to product information
1 of 1

0565

Classic hot water bottle 1.8 l with anthracite knitted cover

Classic hot water bottle 1.8 l with anthracite knitted cover

Regular price €18,45 EUR
Regular price Sale price €18,45 EUR
Sale Sold out
€15,12 net €18,45 gross incl. 22% VAT
Taxes included. Shipping calculated at checkout.

500 in stock

Veredelung auf Anfrage. Bitte Veredelung bei der Bestellung separat anfragen. 🎨 Request a free design proposal

Product information

Manufacturer item no.: 0565
Material: Hot water bottle: thermoplastic; cover: 100% polyacrylic
Weight: 380 g
Country of origin: Germany
Care instructions: Cover machine washable at 30 °C. Empty the hot water bottle completely after use and protect from sunlight.
Customization: by Ladurner 1970

✔ Sofort verfügbar ab Lager ✔ Veredelung durch Ladurner 1970 (Stick/Druck) ✔ Ideal für Firmen, Vereine & Events

Tasteful and timeless: This is the classic hot water bottle showing its elegant side. Featuring a sophisticated cable-knit cover, this high-quality heat source is also visually impressive in every respect.

Quality “Made in Germany”

Classic hot water bottle: Thermoplastic, manufactured according to the British Standard BS 1970:2012, tested and monitored by independent accredited laboratories

Capacity: approx. 1.8 l, with an XL retaining tab for safe filling

Cover: High-quality knit cover with an elegant cable-knit pattern, 100% polyacrylic, anthracite, removable and washable at 30 degrees.

Size: approx. 33 x 19.5 x 4.5 cm


Warnings/Product safety

General warning! Particular care must be taken when using the hot water bottle for anyone sensitive to heat, suffering from joint inflammation, or with poor circulation. Certain illnesses, e.g. diabetes, may be accompanied by impaired temperature sensation.
Disabled or frail individuals may not be able to signal if it becomes too hot for them. When using the hot water bottle for infants, it is essential to ensure that the water temperature does not exceed 40 degrees Celsius. Always check that it does not become overheated. As babies cannot yet move themselves, they are entirely dependent on the attention of their parents. In case of doubt, consult your doctor before using the hot water bottle.

Hot water bottles and their components are not toys and are not suitable for children.

Handling thermoplastic hot water bottles:

Do not use boiling water to fill this hot water bottle (we recommend a water temperature of max. 60 °C) and fill to a maximum of two-thirds. Do not overfill the bottle, as this could lead to the bottle bursting. Hold the bottle by the neck in an upright position and fill the water in slowly to avoid hot water splashing back. Carefully squeeze the bottle to allow air to escape until water appears at the opening. Tighten the closure sufficiently to ensure that no water leaks out. Hand-tight should be enough.
Finally, ensure that the funnel is empty. If there is a possibility of prolonged skin contact, an appropriate bottle cover should be used to avoid burns.

Handling eco hot water bottles:

Do not use boiling water when filling the hot water bottle; we recommend a water temperature of max. 60 °C. Open the zipper or hotel closure and fold the cover back over the shoulders. When filling, hold the hot water bottle on the side with your left hand and use the cover as heat protection. With the hot water bottle standing vertically on a surface, turn it to the right with your holding hand so that the filler neck is slightly tilted and start filling the bottle carefully through the large opening until the water is approx. 4 cm below the opening. Screw the closure on tightly until it is sealed. Ensure that the filler neck remains round and does not take on an oval shape when screwing on the cap. Turning it by hand is sufficient; do not use any tools. Check before every use that the closure is tight and shows no damage. Use only the original closure. Take care not to bend or fold the bottle!


The following applies to all hot water bottles:

Under no circumstances should you use the hot water bottle as a pillow or sit on it. Do not fill the bottle with water from the domestic hot water system, as this could significantly shorten the service life of the hot water bottle. Avoid contact with oils or fats and hot surfaces. Empty the bottle completely when not in use.
It is essential to protect the bottle from sunlight. Do not place anything on the bottle during storage. Check the bottle and stopper/cap for wear and damage before use.


For your safety!

Avoid contact with hot surfaces. Do not heat in an oven, grill, or microwave. Do not place any sharp-edged or other objects on it. Do not use boiling water to prevent skin burns. For infants and toddlers under 3 years of age, the water temperature must not exceed 40 degrees Celsius; for children 3 years and older, a maximum of 60 degrees Celsius. Therefore, avoid prolonged or direct skin contact. Ensure that you do not fall asleep directly on the hot water bottle, as this can cause skin burns without you noticing.

Please refer to the instructions for use enclosed with the product for further information.
View full details

Ladurner1970 Service

Vom Produkt zum starken Markenauftritt.

Wir beraten, gestalten und veredeln Arbeitsbekleidung, Teamwear und Merch persönlich in Südtirol.

Über 25 Jahre Erfahrung

Erfahrung im Großhandel, in der Beratung und in der Textilveredelung.

Veredelung in Südtirol

Persönliche Betreuung und kurze Wege von Bruneck aus.

Designvorschlag inklusive

Wir helfen bei Platzierung, Farben und einer überzeugenden Umsetzung.

Europaweite Lieferung

Zuverlässige Lieferung für Unternehmen, Vereine und Tourismusbetriebe.

Ihr Produkt. Ihr Logo. Ihr Entwurf.

Kostenlosen KI-Designvorschlag erhalten

Laden Sie Ihr Logo hoch oder beschreiben Sie Ihre Idee. Wir erstellen einen ersten realistischen Designvorschlag für dieses Produkt und stimmen ihn anschließend persönlich mit Ihnen ab.

  • Kostenlos und unverbindlich
  • Persönlich geprüft
  • Antwort in der Regel innerhalb von 24 Stunden
★★★★★

5,0 bei Google

Basierend auf 12 Kundenbewertungen

Materialgerecht & langlebig

Die passende Veredelung für jedes Projekt

Einfacher Projektablauf

In sechs Schritten zum fertigen Produkt

  1. 1
    Produkt auswählen Modell, Farbe und Menge festlegen.
  2. 2
    Logo senden Datei hochladen oder vorhandenes Material übermitteln.
  3. 3
    Designvorschlag Wir entwickeln eine erste visuelle Richtung.
  4. 4
    Freigabe Sie prüfen und bestätigen die Gestaltung.
  5. 5
    Produktion Wir veredeln Ihre Artikel fachgerecht.
  6. 6
    Lieferung Die fertige Ware kommt zuverlässig zu Ihnen.

Von Einzelstück bis Großauflage

Mengen, die zu Ihrem Projekt passen

MengeGeeignet fürVorteil
1–9 StückMuster, Einzelstücke, NachbestellungMaximale Flexibilität
10–49 StückTeams, Gastronomie, kleine BetriebeAttraktiver Stückpreis
50–249 StückUnternehmen, Vereine, EventsDeutlicher Mengenrabatt
ab 250 StückKampagnen, Handel, GroßauflagenIndividuelle Projektkalkulation

Die konkrete Kalkulation hängt von Artikel, Veredelung, Motivgröße und Lieferzeit ab.

Gut informiert entscheiden

Häufige Fragen

Wie funktioniert der KI-Designvorschlag?

Sie senden Produkt, Logo, Farben und Stilwunsch über das Anfrageportal. Daraus entsteht ein erster Gestaltungsvorschlag, der anschließend persönlich geprüft und mit Ihnen abgestimmt wird.

Kann ich mein eigenes Logo verwenden?

Ja. Senden Sie uns Ihr Logo möglichst als Vektor-, PDF-, SVG- oder hochauflösende PNG-Datei.

Gibt es Mengenrabatte?

Ja. Wir kalkulieren abhängig von Artikel, Menge und Veredelung ein individuelles Angebot.

Are samples available free of charge?

We are happy to provide samples so you can check quality and sizing. As ordering, handling and transport involve costs, all samples are charged for. If you subsequently place an order, the samples will be included in your order and, on request, customised with your logo. If no order is placed, the samples remain with you and will be charged for. We therefore cannot provide free samples or accept sample returns.