Skip to product information
1 of 7

0911

Mini hot water bottle 0.2 l with grey velour cover

Mini hot water bottle 0.2 l with grey velour cover

Regular price €8,95 EUR
Regular price Sale price €8,95 EUR
Sale Sold out
€7,34 net €8,95 gross incl. 22% VAT
Taxes included. Shipping calculated at checkout.

500 in stock

Veredelung auf Anfrage. Bitte Veredelung bei der Bestellung separat anfragen. 🎨 Request a free design proposal

Product information

Manufacturer item no.: 0911
Material: Hot water bottle: thermoplastic; velour cover: 100% polyester
Weight: 95 g
Country of origin: Germany
Care instructions: Cover is removable and machine washable at 30 °C. Empty the hot water bottle completely after use and protect from sunlight.
Customization: by Ladurner 1970

✔ Sofort verfügbar ab Lager ✔ Veredelung durch Ladurner 1970 (Stick/Druck) ✔ Ideal für Firmen, Vereine & Events

Warmth "To-Go" - the mini hot water bottle in a velvety-soft velour cover is the perfect warming companion for your jacket pocket, stroller, etc. ... and useful wherever compact warmth is needed! SO small and SO wonderfully warm. Ideal as promotional merchandise with a logo print.

Quality “Made in Germany”

Mini hot water bottle: Thermoplastic, manufactured according to British Standard BS 1970:2012,
tested and monitored by independent accredited laboratories

Capacity: approx. 0.2 l

Cover: Velvety-soft velour cover, grey, well-suited for logo printing when used as an eye-catching promotional item, 100% polyester, removable and washable at 30 degrees.

Size: approx. 16 x 10.7 x 3.5 cm

Tip: A lovely gift idea as a baby hot water bottle for birth

These little hot water bottles are not only popular as hand warmers, but they also provide cozy warmth for little feet in infant car seats or strollers. Once they are no longer needed there, they can be used as pocket warmers.


Warnings/Product Safety

General warning! Special care should be taken when using the hot water bottle for all individuals who are sensitive to heat, suffer from arthritis, or have circulatory problems. Certain medical conditions, such as diabetes, can be accompanied by impaired temperature sensitivity.
Disabled or frail individuals may not be able to indicate if the bottle is too warm. When using the hot water bottle for infants, it is essential to ensure that the water temperature does not exceed 40 degrees Celsius. Always check that the bottle does not become overheated. Since babies cannot change their position independently, they are entirely dependent on their parents' attention. If in doubt, consult your doctor before using the hot water bottle.

Hot water bottles and their components are not toys and are not suitable for children.

Handling thermoplastic hot water bottles:

Do not use boiling water for filling this hot water bottle (we recommend a water temperature of max. 60 °C) and fill it to a maximum of two-thirds capacity. Do not overfill the bottle, as this could cause it to burst. Hold the bottle by the neck in an upright position and fill it slowly to avoid hot water splashing back. Gently squeeze the bottle to allow air to escape until water appears at the opening. Tighten the stopper sufficiently to ensure that no water leaks. Hand-tight should be sufficient.
Finally, make sure the funnel is empty. If there is a possibility of prolonged contact with the skin, an appropriate bottle cover should be used to avoid burns.

Handling eco hot water bottles:

Do not use boiling water when filling the hot water bottle; we recommend a water temperature of max. 60 °C. Open the zipper or overlapping closure and pull the cover back over the shoulders. When filling, hold the hot water bottle sideways with your left hand and use the cover as heat protection. With the hot water bottle standing vertically on a surface, turn it to the right with your holding hand so that the filler neck is slightly angled, and begin to carefully fill the bottle through the large opening until the water level is approx. 4 cm below the opening. Screw the stopper on tightly until it is sealed. Ensure that the filler neck is round and does not take on an oval shape when screwing on the cap. Hand-tightening is sufficient; do not use tools. Before each use, check that the stopper is tight and shows no signs of damage. Use only the original stopper. Make sure not to bend or fold the bottle!


Applies to all hot water bottles:

Under no circumstances should you use the hot water bottle as a cushion or sit on it. Do not fill the bottle with water from the domestic hot water system, as this could significantly shorten the life of the hot water bottle. Avoid contact with oils, fats, and hot surfaces. Empty the bottle completely when not in use.
It is essential to protect the bottle from direct sunlight. Do not place anything on top of the bottle during storage. Before use, check the bottle and stopper/cap for wear and damage.


For your safety!

Avoid contact with hot surfaces. Do not heat in an oven, grill, or microwave. Do not place sharp-edged or other objects on it. Do not use boiling water to prevent skin burns. For infants and toddlers under 3 years of age, the water temperature must be max. 40 degrees Celsius; for children 3 years and older, max. 60 degrees Celsius. Therefore, avoid prolonged or direct contact with the skin. Ensure that you do not fall asleep with the hot water bottle directly on your skin, as this can cause unnoticed skin burns.

For further information, please refer to the instructions for use enclosed with the product.
View full details

Ladurner1970 Service

Vom Produkt zum starken Markenauftritt.

Wir beraten, gestalten und veredeln Arbeitsbekleidung, Teamwear und Merch persönlich in Südtirol.

Über 25 Jahre Erfahrung

Erfahrung im Großhandel, in der Beratung und in der Textilveredelung.

Veredelung in Südtirol

Persönliche Betreuung und kurze Wege von Bruneck aus.

Designvorschlag inklusive

Wir helfen bei Platzierung, Farben und einer überzeugenden Umsetzung.

Europaweite Lieferung

Zuverlässige Lieferung für Unternehmen, Vereine und Tourismusbetriebe.

Ihr Produkt. Ihr Logo. Ihr Entwurf.

Kostenlosen KI-Designvorschlag erhalten

Laden Sie Ihr Logo hoch oder beschreiben Sie Ihre Idee. Wir erstellen einen ersten realistischen Designvorschlag für dieses Produkt und stimmen ihn anschließend persönlich mit Ihnen ab.

  • Kostenlos und unverbindlich
  • Persönlich geprüft
  • Antwort in der Regel innerhalb von 24 Stunden
★★★★★

5,0 bei Google

Basierend auf 12 Kundenbewertungen

Materialgerecht & langlebig

Die passende Veredelung für jedes Projekt

Einfacher Projektablauf

In sechs Schritten zum fertigen Produkt

  1. 1
    Produkt auswählen Modell, Farbe und Menge festlegen.
  2. 2
    Logo senden Datei hochladen oder vorhandenes Material übermitteln.
  3. 3
    Designvorschlag Wir entwickeln eine erste visuelle Richtung.
  4. 4
    Freigabe Sie prüfen und bestätigen die Gestaltung.
  5. 5
    Produktion Wir veredeln Ihre Artikel fachgerecht.
  6. 6
    Lieferung Die fertige Ware kommt zuverlässig zu Ihnen.

Von Einzelstück bis Großauflage

Mengen, die zu Ihrem Projekt passen

MengeGeeignet fürVorteil
1–9 StückMuster, Einzelstücke, NachbestellungMaximale Flexibilität
10–49 StückTeams, Gastronomie, kleine BetriebeAttraktiver Stückpreis
50–249 StückUnternehmen, Vereine, EventsDeutlicher Mengenrabatt
ab 250 StückKampagnen, Handel, GroßauflagenIndividuelle Projektkalkulation

Die konkrete Kalkulation hängt von Artikel, Veredelung, Motivgröße und Lieferzeit ab.

Gut informiert entscheiden

Häufige Fragen

Wie funktioniert der KI-Designvorschlag?

Sie senden Produkt, Logo, Farben und Stilwunsch über das Anfrageportal. Daraus entsteht ein erster Gestaltungsvorschlag, der anschließend persönlich geprüft und mit Ihnen abgestimmt wird.

Kann ich mein eigenes Logo verwenden?

Ja. Senden Sie uns Ihr Logo möglichst als Vektor-, PDF-, SVG- oder hochauflösende PNG-Datei.

Gibt es Mengenrabatte?

Ja. Wir kalkulieren abhängig von Artikel, Menge und Veredelung ein individuelles Angebot.

Are samples available free of charge?

We are happy to provide samples so you can check quality and sizing. As ordering, handling and transport involve costs, all samples are charged for. If you subsequently place an order, the samples will be included in your order and, on request, customised with your logo. If no order is placed, the samples remain with you and will be charged for. We therefore cannot provide free samples or accept sample returns.