Skip to product information
1 of 10

0091

Children's eco-friendly hot water bottle 0.8 l with "Frog" velour cover, green

Children's eco-friendly hot water bottle 0.8 l with "Frog" velour cover, green

Regular price €15,95 EUR
Regular price Sale price €15,95 EUR
Sale Sold out
€13,07 net €15,95 gross incl. 22% VAT
Taxes included. Shipping calculated at checkout.

500 in stock

Veredelung auf Anfrage. Bitte Veredelung bei der Bestellung separat anfragen. 🎨 Request a free design proposal

Product information

Manufacturer item no.: 0091
Material: Cover: 100% polyester
Weight: 181 g
Country of origin: Germany
Care instructions: Cover machine washable at 30 °C. Empty the hot water bottle completely after use and protect from sunlight.
Customization: by Ladurner 1970

✔ Sofort verfügbar ab Lager ✔ Veredelung durch Ladurner 1970 (Stick/Druck) ✔ Ideal für Firmen, Vereine & Events

Who can resist him? With his happy face, this frog delights not only the little ones. He also infects the "grown-ups" with his cheerfulness! This eco-friendly hot water bottle warms everyone's heart. This lovable heating companion is perfect for collecting and cuddling.

Quality "Made in Germany": patented hot water bottle with safety closure,
tested and monitored by independent accredited laboratories

Junior Comfort eco-hot water bottle: produced from over 90% renewable raw materials, tested according to ASTM D 6866-12, PVC-free, phthalate-free - therefore dimensionally stable (not foldable or bendable) and recyclable.

Capacity: approx. 0.8 l, radiant design on both sides

Cover: Velvety soft velour cover, 100% polyester, green, with an embroidered happy face and elaborate embroidery appliqués on the front, lined, practical hotel closure on the back, removable and washable at 30 degrees.

Size: approx. 23 x 14 x 4.5 cm


Warnings/Product Safety

General warning! Special care must be taken when using the hot water bottle for people who are sensitive to heat, suffer from joint inflammation, or have poor circulation. Certain medical conditions, such as diabetes, can be associated with impaired temperature sensitivity.
Disabled or frail people may not be able to make themselves heard if they become too hot. When using the hot water bottle for infants, it is essential to ensure that the water temperature does not exceed 40 degrees Celsius. Always check to ensure that no overheating occurs. Since babies cannot yet change their position independently, they are entirely dependent on the attention of their parents. In case of doubt, consult your doctor before using the hot water bottle.

Hot water bottles and their components are not toys and are not suitable for children.

Handling thermoplastic hot water bottles:

Do not use boiling water to fill this hot water bottle (we recommend a water temperature of max. 60 °C) and fill it to a maximum of two-thirds. Do not overfill the bottle, as this could cause it to burst. Hold the bottle by the neck in an upright position and fill it slowly to avoid splashing hot water back. Press the bottle together very carefully to allow air to escape until water appears at the opening. Tighten the closure sufficiently to ensure that no water leaks. Hand-tight should be enough.
Finally, ensure the funnel is empty. If there is a possibility of prolonged contact with the skin, an appropriate bottle cover should be used to avoid burns.

Handling eco-hot water bottles:

Do not use boiling water to fill the hot water bottle; we recommend a water temperature of max. 60 °C. Open the zipper or hotel closure and fold the cover back over the shoulders. When filling, hold the hot water bottle sideways with your left hand and use the cover as heat protection. With the hot water bottle standing vertically on a surface, turn it to the right with your holding hand so that the filling neck is slightly tilted, and begin filling the bottle carefully through the large opening until the water level is approx. 4 cm below the opening. Screw the closure on until it is tight. Make sure that the filling neck is round when screwing on the cap and does not take on an oval shape. Tightening by hand is sufficient; do not use any tools. Check before each use that the closure is tight and shows no signs of damage. Use only the original closure. Take care not to bend or fold the bottle!


For all hot water bottles:

Under no circumstances should you use the hot water bottle as a cushion or sit on it. Do not fill the bottle with water from a domestic hot water system, as this could significantly shorten the life of the hot water bottle. Avoid contact with oils, fats, and hot surfaces. Empty the bottle completely when not in use.
It is essential to protect the bottle from sunlight. Do not place anything on the bottle during storage. Check the bottle and stopper/cap for wear and damage before use.


For your safety!

Avoid contact with hot surfaces. Do not heat in an oven, grill, or microwave. Do not place sharp-edged or other objects on it. Do not use boiling water to prevent skin burns. For infants and toddlers under 3 years old, the water temperature must be max. 40 degrees Celsius; for children from 3 years old, max. 60 degrees Celsius. Therefore, avoid prolonged or direct contact with the skin. Ensure that you do not fall asleep with the hot water bottle directly on your skin, as this can cause burns to the skin without being noticed.

For further information, please refer to the instructions for use enclosed with the product.
View full details

Ladurner1970 Service

Vom Produkt zum starken Markenauftritt.

Wir beraten, gestalten und veredeln Arbeitsbekleidung, Teamwear und Merch persönlich in Südtirol.

Über 25 Jahre Erfahrung

Erfahrung im Großhandel, in der Beratung und in der Textilveredelung.

Veredelung in Südtirol

Persönliche Betreuung und kurze Wege von Bruneck aus.

Designvorschlag inklusive

Wir helfen bei Platzierung, Farben und einer überzeugenden Umsetzung.

Europaweite Lieferung

Zuverlässige Lieferung für Unternehmen, Vereine und Tourismusbetriebe.

Ihr Produkt. Ihr Logo. Ihr Entwurf.

Kostenlosen KI-Designvorschlag erhalten

Laden Sie Ihr Logo hoch oder beschreiben Sie Ihre Idee. Wir erstellen einen ersten realistischen Designvorschlag für dieses Produkt und stimmen ihn anschließend persönlich mit Ihnen ab.

  • Kostenlos und unverbindlich
  • Persönlich geprüft
  • Antwort in der Regel innerhalb von 24 Stunden
★★★★★

5,0 bei Google

Basierend auf 12 Kundenbewertungen

Materialgerecht & langlebig

Die passende Veredelung für jedes Projekt

Einfacher Projektablauf

In sechs Schritten zum fertigen Produkt

  1. 1
    Produkt auswählen Modell, Farbe und Menge festlegen.
  2. 2
    Logo senden Datei hochladen oder vorhandenes Material übermitteln.
  3. 3
    Designvorschlag Wir entwickeln eine erste visuelle Richtung.
  4. 4
    Freigabe Sie prüfen und bestätigen die Gestaltung.
  5. 5
    Produktion Wir veredeln Ihre Artikel fachgerecht.
  6. 6
    Lieferung Die fertige Ware kommt zuverlässig zu Ihnen.

Von Einzelstück bis Großauflage

Mengen, die zu Ihrem Projekt passen

MengeGeeignet fürVorteil
1–9 StückMuster, Einzelstücke, NachbestellungMaximale Flexibilität
10–49 StückTeams, Gastronomie, kleine BetriebeAttraktiver Stückpreis
50–249 StückUnternehmen, Vereine, EventsDeutlicher Mengenrabatt
ab 250 StückKampagnen, Handel, GroßauflagenIndividuelle Projektkalkulation

Die konkrete Kalkulation hängt von Artikel, Veredelung, Motivgröße und Lieferzeit ab.

Gut informiert entscheiden

Häufige Fragen

Wie funktioniert der KI-Designvorschlag?

Sie senden Produkt, Logo, Farben und Stilwunsch über das Anfrageportal. Daraus entsteht ein erster Gestaltungsvorschlag, der anschließend persönlich geprüft und mit Ihnen abgestimmt wird.

Kann ich mein eigenes Logo verwenden?

Ja. Senden Sie uns Ihr Logo möglichst als Vektor-, PDF-, SVG- oder hochauflösende PNG-Datei.

Gibt es Mengenrabatte?

Ja. Wir kalkulieren abhängig von Artikel, Menge und Veredelung ein individuelles Angebot.

Are samples available free of charge?

We are happy to provide samples so you can check quality and sizing. As ordering, handling and transport involve costs, all samples are charged for. If you subsequently place an order, the samples will be included in your order and, on request, customised with your logo. If no order is placed, the samples remain with you and will be charged for. We therefore cannot provide free samples or accept sample returns.